R SERIES PISTON PUMP HOT MELT ADHESIVE MACHINE

R series piston pump hot melt adhesive machine The control panel is easy to operate. Over temperature protection alarm. Set all temperature ranges by one key Independent temperature control of melting cylinder, throat and spray gun. Seven day clock setting, one key time copy A ready delay time can be set to ensure the stability of hot melt viscosity Ready, standby and malfunction three signal lights, with the production line online

PUR BARREL 5-GAL HOT MELT ADHESIVE MACHINE

There is an O-ring seal between the groove of the heating plate and the inner ring of the rubber barrel, which makes the molten liquid colloid not contact with the air, and solves the problem that PUR and other adhesives cannot contact with the air when they are melted. Variable speed motors and various flow pumps are used to customize to specific manufacturing requirements. The position sensor displays the position of the pressure plate in the barrel, and the low glue level and empty barrel trigger an alarm and end all actions. The outer surface of heating plate is coated with Teflon to prevent carbonization, ensure good gum and reduce blockage. Universal joint connection is used between gear pump and motor to ensure the stability and uniformity of rubber machine in high speed operation.

C SERIES CREATIVE INTELLIGENT TEMPERATURE CONTROL SYSTEM HOT MELT ADHESIVE MACHINE

Adjust PID parameters according to different types of glue and environmental temperature One-click to start up or shutdown main power supply of the heater More external functions: one-click heat preservation, fault alarm Rotation speed of motors and gear pumps are 5 segments linear adjustment Real-time displays the speed of production line Automatic output linear adjustment Precise display motor rotation speed, can up to 0.1 RPM